Fire Cement Cartridge

310ml Cartridge

 Black fire cement for domestic and commercial applications on fire bricks, fire grates,
flue pipes, flue bricks, boilers and other applications subject to extreme heat. Offers
excellent adhesion to fire bricks, blockwork, stone, and clayware. Resistant to 1250 C.

VITCAS BFC - Black Fire Cement is a smooth paste that sets rock hard when exposed
to the air. Fire Cement has excellent adhesion to fire bricks, blockwork, stone, clayware
, and most metals. Primarily useful for minor repair work, cracks less than 5mm and seals
to form smoke and gas-tight joints.

Uses:

• Sealing of visible metal to metal joints
• Sealing of visible joints between flue pipes and stoves in conjunction with stove rope
• Installation or repair of ranges, fireplaces, ovens and boilers
• Assembly of cast iron stove, cookers and ranges

Application:
Make sure the area is clean and that all dirt, dust, rust and grease is removed. Cut off
the top of the cartridge, screw on the nozzle and cut the nozzle to the required size.
Dampen the surface where the material is to be applied. Apply using a cartridge gun.
The material will set at room temperatures but the time will be reduced by lighting
the fire or applying heat, gradually increasing over a four-hour period. After curing
any fine cracks that may appear in the cement should be filled with the same material
to ensure an air-tight seal.